Download document () of 20
Send email
Download
You have exceeded the download limit
Power factor - the measure of how efficiently power is being used - is a power quality issue that ever facility should be familiar with. Eaton's line of power factor correction products feature technology to meet the needs of every industry. These robust solutions, which include capacitors, reactors and controllers for low-voltage applications, raise facility power factor to meet the requirements of any utility, helping to eliminate costly utility charges.
| xCap Capacitors | |
|---|---|
Power |
6.3 to 30 kvar |
Rated Voltage |
230 to 525 V AC |
Frequency |
50/60 Hz |
Connection |
3 Phases Delta |
Capacitance tolernace |
-0.5 |
Losses (dielectric) |
< 0.2 W/kvar |
Losses (Total) |
< 0.45 W/kvar |
Overcurrent |
Up to 1.5 x In |
Inrush current |
Up to 200 x In |
Overvoltage |
1.1 x Un 8 hrs daily 1.15 x Un 30 min. daily |
Test Voltage |
Terminals: 2.15 x Un AC 2s Terminal/case: 3kV AC 10s |
Discharge resistor |
≤ 60 s to 50 V or less |
Operating temperature |
–40 to +55 °C (Class D according to IEC 60831) |
Storage temperature |
–40 to +85 °C |
Relative humidity |
Up to 95% |
Degree of protection |
IP 20 |
Altitude |
4,000 m above sea level max |
Mounting position |
Upright |
Cooling |
Natural or forced |
Mounting / Grounding |
Threaded bolt M12 (10Nm) |
Meanlife expectancy |
Up to 135,000 hrs (Class -40/C) Up to 100,000 hrs (Class -40/D) |
Switching operations |
Max. 5,000 per year |
Case |
Extruded round aluminum |
Dielectric |
Metalized polypropylene film |
Impregnation |
Semi-dry biodegradable resin |
Terminals |
Optimized isolated safety Terminals, 50A max. (1.2 Nm) |
Safety |
Self-healing with overpressure Disconnector (Max S.C: 10k |
| Standard | IEC 60831-1+2 |
| xReact Detuned Reactors | |
|---|---|
Power |
12.5 to 100 kvar |
Rated Voltage |
400/415/440 V AC |
Frequency |
50/60 Hz |
Connection |
3 Phases Delta |
Inductance tolerance |
± 5 % |
Detuning |
5.67%, 7%, 14 % |
Windings |
Aluminum |
Insulation class |
H |
Test Voltage - windings |
4kV, 1 min. |
Cooling |
Natural or forced |
Operating temperature |
0 to +50 °C |
Storage temperature |
–40 to +85 °C |
Altitude |
1000 m above sea level |
Degree of protection |
IP 00 |
Linearity |
Up to 2 xIn (5.67%) Up to 1.73 xIn (7%) Up to 1.43 xIn (14%) |
| Duty cycle | 100% continuous |
Overload factor |
1.1 times the rated current |
Temperature protection |
Microswitch (NC) |
Dimensions |
Refer to specific data sheets |
Harmonics |
V3 = 0.5% Vr (duty cycle = 100%) V5= 6.0% Vr (duty cycle = 100%) V7 = 5.0% Vr (duty cycle = 100%) V11 = 3.5% Vr (duty cycle = 100%) V13 = 3.0% Vr (duty cycle = 100%) |
Standard |
IEC 60076-6 |
| xPFC Controller | |
|---|---|
Power consumption |
5 VA max |
Operating temperature |
–20 to +60 °C |
Storage temperature |
–20 to +75 °C |
Relative Humidity |
Up to 95%, non-condensing |
Degree of protection |
Front: IP54 / Rear: IP20 |
Housing |
Metal / Plastic |
Panel cutout |
138 x 138 mm |
Display |
Large and multifunctional LCD (2 × 16 characters) |
Number of relay outputs |
XPFC006: 6 outputs / XPFC012:12 outputs |
Power factor setting |
From 0.3 inductive to 0.3 capacitive |
Switching/discharge time range |
1 s to 20 min |
No. of control series |
20 series preset + control series editor forprogramming |
Control modes |
Series switching Circular switching Self optimized intelligent control mode |
Voltage Measurement |
30 to 525 VAC (L-N / L-L) |
Current Measurement |
X:5A or X:1A selectable |
Minimum operating current |
40 mA / 10 mA |
Maximum current |
5.3 A (sinusoidal) |
Accuracy |
Current, voltage: 1% / Power: 2% |
System parameters displayed |
Voltage (VAC) Reactive Power (kVAR) Active Power (kW) Frequency (Hz) Apparent Power (KVA) Apparent Current (A) Temperature °C Real time cos θ kVAR value to target cos θ Harmonics (3rd to 19th) V(%), I(%) Energy kVAR |
Alarm output |
Insufficient compensation Overcompensation Undercurrent Overcurrent Overtemperature Harmonics exceeded Threshold value programmable Internal error storage |
Recall recorded values |
Maximum voltage Minimum voltage Maximum reactive, active, and apparent power Maximum temperature Maximum THD-V / THD-I Switching cycle of capacitors Operation time of capacitors |
Interface |
1x RS485 (Mosdbus RTU) - XPFC012230M-1 only |
